|
|
三星专用编程器 |
|
|
GW-PRO2
Gang Programmer |
|
We
support a series of production quality 8-gang
programmers for the Sam-sung OTP and MTP
microcontrollers of SAM4(S3P7xxx series),
SAM8(S3P8xxx, S3P9xxx series), CalmRISC(S3FBxxx,
S3FKxxx series) and ARM7(S3F4xxx, S3F3xxx) family.
They are operated in stand-alone mode for factory
programming without PC and can also be conne-cted a
PC to program devices, set up operation mode or
download data files. Its unique features allow the
user to quickly and securely program devices. Simple
one-key operation requires no special technical
expertise from your production staff.
Gang programmer consists of a master unit(GW-PRO2)
which connects to various progra-mming adapter
sockets for programming all of OTP or MTP devices
with a different pack-age. The GW-PRO2 programmer
holds the data and parametric information to be
copied new devices. Once the data resides inside the
buffer memory of GW-PRO2, it will be stored securely
and is protected from accidental modifications with
its secured functions. Data in the GW-PRO2 can be
changed by downloading from a PC or by reading a
chip in the master socket.
|
[ Device
Supported ]
- All
Samsung serial type OTP microcontrollers
of SAM4(S3P7xxx), and SAM8(S3P8xxx,
S3P9xxx) series including S3P1860
device.
- All
Samsung serial type MTP(Flash)
microcontrollers of SAM4, SAM8, CalmRISC
and ARM7 families with 3.3V or 5.5V
operating Voltage.
|
[ Features ]
- Program
up to 8 devices at one time
- Very
fast programming speed:
Program speed is 2K byte(OTP mode) and
5K byte(MTP) steps per second including
verification operation.
- Supports
all Samsung serial type OTP and MTP
devices of SAM4(S3P7xxx series) and
SAM8(S3P8xxx, S3P9xxx series),
CalmRISC(S3FBxxx, S3FKxxx series), and
ARM7/9(S3F4xxx series) families via
different programming adapters.
( Programming adapter sockets are sold
separately )
- Supports
MTP devices with 3.3V and 5.5V operating
voltage
-
Individual socket LEDs indicate blank or
verification result
- 340(mm)
x 230(mm) x 50(mm), 2.2Kg weight
- Data to
be programmed is stored inside the flash
memory of the GW-PRO2 and remains intact
during power down. This feature is
useful to move it to the production site
after downloading data from the host PC
and setting up the operation mode in the
design lab.
- Maximum
buffer memory is 1Mbyte (1024 Kbytes)
- Auto
verification of devices and the buffer
memory in the stand-alone mode
-
Selectable program mode (Auto read
protection, LDC protection, Hard lock)
- The
total number of pass and failed device
after programming is displayed and
remains during power down
- Buzzer
sounds after programming finished(
On/Off selectable )
- Complies
to manufactures' programming
specifications
|
[ PC-hosted Operating
Mode ]
- Serial
port interface (38400bps)
- Supports
Samsung standard hex or Intel hex format
data for downloading file into the
buffer memory
- The
driver software is user friendly
single-menu operation
- User can easily select device type or
configuration settings
- All programming functions are
available globally via hot keys: Read
master socket, Program, Verify,
Read(code) protection, Blank check,
Checksum, Erase, LDC protection,Hard
lock, and Auto( Blank -> Program ->
Verify -> Read protection)
- Full
screen data dump in hex mode
- Batch
mode to program multiple data files to
one device.
- Download different files by changing
start and end address and program all
data from address 0 to the end
address of last file.
- Select
Key Lock function for simple one-key
operation in the stand-alone mode. If
Key Lock is selected, only program,
verify and blank check functions are
available in the stand-alone mode for
protecting operator's mistake
|
[ Stand-alone
Operating Mode ]
- Full function
menus( ROM size selection, Read, Program,
Verify, Blank check, Checksum, Erase, Auto read
protection/LDC protection/Hard lock selection,
Buzzer sound selection ) for higher level
personnel
- Key Lock
function menus( Program, Verify, Blank check,
Checksum ) for operation staff
- Program, Blank
check or Verify is available with eight devices
at one time
- 2 lines x 16
characters LCD display provides function menus
and programming results
|
[ Download Files ]
Driver Software |
File name |
GW-PRO2.EXE |
Descriptions |
Version: V1.13
(2,319K)
Upload date: June/07/2002
Windows 95/98/2000/NT/XP driver software for
GW-PRO2 gang programmers. |
File name |
GW-PRO.EXE
|
Descriptions |
Version: V1.30
(1,730K)
Upload data: Dec/24/2001
Windows 95/98/2000/NT/XP driver software for
GW-PRO gang programmers. |
File name |
UM-GWPRO2.EXE
|
Descriptions |
Version: V1.00
(340K)
Upload data: Sep/18/2000
User's manual(PDF file) for GW-PRO2 gang
programmers. |
File name |
UM-GWPRO.EXE |
Descriptions |
Version: V1.10
(269K)
Upload data: July/17/1999
User's manual(PDF file) for GW-PRO gang
programmers. |
|
|
Part
Number |
Descriptions |
GA-8SOP
GA-16DIP
GA-20DIP
GA-20SOP
GA-24SDIP
GA-24SOP
GA-28SOP
GA-30SDIP
GA-32SDIP
GA-32SOP
GA-42SDIP
GA-44QFP
GA-64SDIP
GA-64QFP
GA-80QFP
GA-80TQFP
GA-100QFP
GA-100TQFP
GA-128QFP
GA-160QFP
GA-Pellet
GA1860-20DIP
GA1860-20SOP
GA7048-42SDIP
GA7048-44QFP
GA7515/7559-64SDIP
GA7515/7559-64QFP
GA7544-24SOP
GA8095-32SDIP
GA8095-32SOP
GA8047-40DIP
GA821A-80TQFP
GA84A4-64QFP
GA8615-42SDIP
GA8615-44QFP
GA8629/863A-44QFP
GA8827-42SDIP
GA8837-42SDIP
GA9004-40DIP
GA9658-16DIP
GA9658-16SOP
GA9658-20DIP
GA9658-20SOP
GA9664-20DIP
GA9664-24SDIP
GA9664-20SOP
GA9664-24SOP
GA380D-42SDIP
GA-S3FB42FX(100TQFP)
GA-S3FK537X(64LQFP)
GA-S3F441FX(64LQFP)
GA-S3F442FX(80TQFP)
|
Standard Gang Adapter
for 8SOP
Standard Gang Adapter for 16DIP
Standard Gang Adapter for 20DIP
Standard Gang Adapter for 20SOP
Standard Gang Adapter for 24SDIP
Standard Gang Adapter for 24SOP
Standard Gang Adapter for 28SOP
Standard Gang Adapter for 30SDIP
Standard Gang Adapter for 32SDIP
Standard Gang Adapter for 32SOP
Standard Gang Adapter for 42SDIP
Standard Gang Adapter for 44QFP
Standard Gang Adapter for 64SDIP
Standard Gang Adapter for 64QFP
Standard Gang Adapter for 80QFP
Standard Gang Adapter for 80TQFP
Standard Gang Adapter for 100QFP
Standard Gang Adapter for 100TQFP
Standard Gang Adapter for 128QFP
Standard Gang Adapter for 160QFP
Standard Gang Adapter for Pellet OTP/MTP
S3P1860 (KS51P860)
S3P1860 (KS51P860)
S3P7048 (KS57P0408)
S3P7048 (KS57P0408)
S3P7515/P7559 (KS57P5116/P5532)
S3P7515/P7559
(KS57P5116/P5532)
S3P7544 (KS57P5404)
S3P7544 (KS57P5404)
S3P8095/P8047/P80E7
(KS88P0916/0424/01424)
S3P8095/P8047/P80E7
(KS88P0916/0424/01424)
S3P8047/P80E7 (KS88P0424/01424)
S3P821A (KS88P2148)
S3P84A4 (KS88P41004)
S3P8615 (KS88P6116)
S3P8615 (KS88P6116)
S3P8629/P863A (KS88P6232/P6348)
S3P8827 (KS88P8224)
S3P8837/P8849/F880A
(KS88P8324/P8432/F80048)
S3P9004 (KS86P0004/P0104)
S3P9658 (KS86P6508)
S3P9658 (KS86P6508)
S3P9658 (KS86P6508)
S3P9658 (KS86P6508)
S3P9664
S3P9664
S3P9664
S3P9664
S3F380D (KS17F80013)
S3FB42F (KS85F40225)
S3FK537 (KS85F50320)
S3F441F (KS32F40125)
S3F442F (KS32F40225)
|
* Mating
cycles: 10,000 Insertions (Office environment)
* Contact Resistance
: 40 ~ 50mΩ
|
|