|
|
 |
三星仿真器 |
|
|
|
In-Circuit
Emulator |
 |
The Smart Kit is
a dedicated In-Circuit Emulator (ICE) for
Samsung SAM4(S3C7xxx series, old name:KS57
series), SAM8(S3C8/9xxx series, old
name:KS86/88 series) families of
micro-controllers and
supports IAR C-compiler.
The debugging system consists of Smart Kit
(Emulator) which can be installed with
different device-specific personality board;
Target Board, and Probe adapters. Smart Kit
is designed to operate on PC-compatible
system ranging from 486 and greater. The
debugger software, Smart Studio, runs under
Microsoft Window 95/98/ 2000/XP enviro nment,
providing a user-friendly operating
environment with an easy-to-use toolbar, fun
ction/hot key and full context-sensitive
help, allowing the user access to a wide
range of supporting software accessories
including fully compatible with Samsung SAMA
and SASM universal assembler. |
[ Device
Supported ]
-
SK-1000: All Samsung
SAM4(S3C7xxx) and
SAM8(S3C8/9xxx) series MCUs,
including SAM8RC core.
|
|
[ Hardware
Features ]
-
Full capacity emulation memory
- SK-1000: 64K byte
-
16K (16 bits wide) real-time
trace memory
-
RS232C interfaces to PC host
system
-
Programmable Vdd voltage for
Target MCU
- User can change the Vdd
voltage of the target MCU by
softwre in Smart Studio.
- Adjustable range: 3.0 ~ 5.0
[V]
-
Real time emulation with
processor full speed
- SK-1000: same as above in
accordance with SAM4 and SAM8
mode
-->The
processor full speed of SAM4
series is 6Mhz,
--> The processor full speed
of SAM8 series is 25Mhz
-
165(mm) x 215(mm) x 45(mm),
1.2Kg weight
-
All electronics cased an iron
and aluminum enclosure
|
[ Emulation
Features ]
-
Download/Upload and emulation
memory edit functions
-
Run/Stop, Reset, Go to cursor,
Go to address, Breakpoint run
-
Program execution skip
- Skip to cursor, Skip to
specific address, Step over
subroutine calls
-
All registers can be displayed
and modified by user
-
Single-step execution
( As the user single-step
execution, all updated
information are highlighted for
easy reference )
- Execution by single step
- Continuous single-step
execution until stop operation
- Up to 255 countable
single-step execution is
possible
-
Program memory address
breakpoint(ROM Breakpoint run)
- Unlimited breakpoint can be
set to halt the processor when
reaching a break point
address.
- Up to 255 countable breakpoint
can be set for an instruction
- Continuous breakpoint
execution until stop operation
-
Timer/Counter function
- Execution time measurement
between program sequence(
Interval timer between program
steps )
- Number of instruction fetch
(program code size) counter
- Number of instruction
execution counter
-
Real-time trace run
- 16K real-time trace memory
records program flow with
address trigger.
-
Program run history view
- 16K real-time run history can
be viewed whenever
program execution is halted
-
OTP/MTP(Flash) Programming
function
- Read, Program, Blank check,
Verify, Read protection, and
Checksum calculation functions
are available for all family OTP
and MTPdevices
- Erase, LDC protection and Hard
Lock functions are available for
MTP devices
(SK-420 for SAM4 series OTPs
only, SK-820 for SAM8 series OTP/MTPs
)
- Complete line of
interchangeable adapter socket
supports all package options
(sold separately, see
Programmers & Adapters)
-
All of emulation function is
possible in the sub-clock mode
operation (32768Hz lower speed)
-
Programmable Clock frequency for
Target MCU
- User can change the clock
frequency of the target MCU by
softwre in Smart Studio.
-
RAM(Register) breakpoint run
- Read, Write, Read/Write
condition
- Various data format(Decimal.
Hexdecimal, Binary)
-
Real-time RAM(Register) display
- Sampling rate: 100ms
- Read, Write, Read/Write
condition
|
[ Software
Features (Smart Studio) ]
- The
Windows 95/98/2000/XP debugger software,
Smart Studio, is an integrated
development environment (IDE) which
allows you to edit and compile your
codes directly. User also get the
additional benefits of the Windows
operating system for visualizing data:
multiple source windows; tool bar with
icons that shows the function of
different buttons; context menu for
customizing font, as well as accessing
special functions to the active window;
window minimization and maximization to
optimize workspace.
-
Customize debugging environment and save
it to disk as Setup or Project.frm file.
This enables you to quickly resume the
debugging session exactly the way you
left it. This file saves information on
RS232 com interface, device
configuration, object file, window
layout, breakpoint count and watch
variables.
- Watch
variables can be set up to effectively
study the results of interested
registers. Watch variables can also be
edited directly within the window for
program analysis.
- Source
level debugging support on Samsung
universal assembler SASM.
[ Download Files
]
|
Driver Software |
|
File
name |
SKSTUDIO.EXE |
|
Descriptions |
Version:
V1.38 (5,232K)
Upload date: Jan/2/2004
Windows 95/98/2000/NT/XP debugger,
Assembler software, and Help file
for Smart Kit In-Circuit Emulators.
(SK-1000, SK-800/820, SK-410/420)
def, mon, and reg files are updated
for new Samsung product name) |
|
File
name |
UM-SK1000.EXE |
|
Descriptions |
Version:
V1.00 (3,028K)
Upload date: Aug/29/2000
User's manual(PDF file) for Debugger
& Smart Kit In-Circuit Emulator
(SK-1000, SK-820, SK-420) |
|
File
name |
UM-C Compiler.EXE
 |
|
Descriptions |
Version:
V1.00 (254K)
Upload date:March/03/2004
User's manual(PDF file) for IAR-C
Compiler on SK-1000 |
|
File
name |
UM-SK.EXE |
|
Descriptions |
Version:
V1.40 (2,526K)
Upload date:Dec/05/1999
User's manual(PDF file) for Debugger
& Smart Kit In-Circuit Emulator
(SK-410,SK-800) |
|
File
name |
INCLUDE.ZIP |
|
Descriptions |
Version:
V1.39 (707K)
Upload date:Mar/17/2003
1. Updated def(define) files for
SAMA universal assembler.
2.Updated reg(register define) files
for SASM assembler.
3. Updated mon(monitor define) files
for Smart Kit Debugger.
(File names are changed according to
new Samsung product name)
|
|
|
Assembler and Utilities |
|
File name |
SAMA.EXE |
|
Descriptions |
Version:
V1.41(107K)
Upload date: July/17/1999
Samsung Universal assembler for S3C18xx,
SAM4(S3C7xxx), SAM8(S3C8/9xxx) series
microcontrollers. |
|
File name |
Include(def,
mon, reg files).EXE |
|
Descriptions |
Version:
V1.34(672K)
Upload date: Sep/13/2001
- Updated def(define) files for SAMA
universal assembler.
- Updated reg(register define) files for
SASM assembler.
- Updated mon (monitor define) files for
Smart Kit Debugger. (File
names are changed according to new
Samsung product name) |
|
File name |
SAMASM.EXE |
|
Descriptions |
Version:
V2.01T(57K)
Upload date: Dec/24/2001
SASM
integrated driver for relocatable assembler
and link. |
|
File name |
SASM57.EXE |
|
Descriptions |
Version:
V2.13(80K)
Upload date: Dec/10/2003
Samsung
relocatable assembler for SAM4(S3C7xxx)
series products. |
|
File name |
SLINK57.EXE |
|
Descriptions |
Version:
V2.14(56K)
Upload date: Dec/10/2003
Linker for
Samsung relocatable assembler SASM57.EXE
|
|
File name |
SASM86.EXE |
|
Descriptions |
Version:
V2.13(77K)
Upload date: Dec/10/2003
Samsung
relocatable assembler for SAM8(S3C9xxx)
series products. |
|
File name |
SLINK86.EXE |
|
Descriptions |
Version:
V2.07(56K)
Upload date: Dec/10/2003
Linker for
Samsung relocatable assembler SASM86.EXE
|
|
File name |
SASM88.EXE |
|
Descriptions |
Version:
V2.10(78K)
Upload date: Dec/10/2003
Samsung
relocatable assembler for SAM8(S3C8xxx)
series products. |
|
File name |
SLINK88.EXE |
|
Descriptions |
Version:
V2.07(56K)
Upload date: Dec/10/2003
Linker for
Samsung relocatable assembler SASM88.EXE
|
|
File name |
SLIB.EXE |
|
Descriptions |
Version:
V2.06(46K)
Upload date: Dec/10/2003
Librarian for
SAM4(S3C7xxx), SAM8(S3C8/9xxx) series.
|
|
File name |
HEX2ROM.EXE |
|
Descriptions |
Version:
V1.34(672K)
Upload date:Sep/13/2001
Generation
ROM code(.OBJ) from HEX file produced by
assembler. |
 |
 |
These are
device-specific personality boards that
connected to the Smart Kit in-circuit
emulator for emulating different device
groups. The target board is an
interchangeable printed circuit board (PCB)
that includes the evaluation and bond-out
chip, the power selection jumper, and cable
connectors. It must be needed for a specific
debugging system configuration. All required
target system cables and DIP-type probe
adapters( only up to 64 pin-count devices)
are included with the device-specific target
board.
( Target boards are supported without charge
by Samsung and Samsung sales agent )
-
Operating voltage range:3.0 - 5.5V
( Optional feature depending on mask ROM
devices )
- Built-in
Sub-clock crystal oscillator
( 32768Hz, Optional feature dpending on
devices )
- DIP
footprint Probe adapter & cable included
( Except 64QFP, 80QFP, 80TQFP, 100QFP,
128QFP,160QFP )
|
[
Special Probe Adapters ]
| The target
board is provided with its own probe adapter
of only the DIP footprint type such as 8 to
64 pin-count devices. For users who need a
surface mount header for 64QFP, 80QFP,
80TQFP, 100QFP, or 100TQFP MCU devices on
their application system, the followings are
offered: |
|
Part Number |
Descriptions
|
|
AC80QF
|
Probe Adapter
for 80QFP devices, such as
SAM4:S3C7238/7235/7248/7245/
7335/S37254/7318/7295/3108/2916
SAM8:S3C8805/8440/8444/8454/8415/821A/S3C8248/8245/8247/8249
CalmRISC:S3CB41D |
|
AC80TQF
|
Probe Adapter
for 80TQFP devices, such as
SAM8:S3C821A/8454/8248/8245/8247/8249
|
|
AC100QF
|
Probe Adapter
for 100QFP devices, such as
SAM4:S3C7306/7265/7565
/ S3C72P5
/72P9/S3C72F5/72G9/72Q5
CalmRISC: S3CB42F, S3CB519
|
|
|
